Changing the power level (LEVEL)

Auto flash

The flash unit adjusts the power level automatically when the LEVEL lamp [AUTO] on the display panel is lit.

Manual flash

The power level for the flash unit can be adjusted.

Press the LEVEL button to select the power level to be set.

•The power level is changed in the following order.

1/1 t 1/2 t1/4 t1/8 t 1/16 t1/32 tAUTO t 1/1 t. . .

•In manual flash photography, if the power level is set at 1/1 then the flash will go off at full power. The power level range (e.g. 1/1 t1/2) corresponds to the aperture range (e.g. F4 t 5.6).

•Change the custom setting when you change the power level for a mode other than the M mode of the camera (page 44).

•For details on the manual flash, see page 32.

GB26