Use this hookup if."
;Your cable TV company scrambles some channels, but not all of them (pay channels vs. regular cable channels) and you need to use a cable box, and
;You want to enjoy the Twin View feature.
With this setup you can:
;Use the LCD projection TV remote control to change channels on your cable box when the signal is scrambled. To program your Sony remote control to operate your cable box, see "Programming the Remote Control" on page 86.
;Use the LCD projection TV remote control to change channels using your LCD projection TV when the signal is not scrambled. Your LCD projection TV's tuner provides a better signal than the cable box.
;Use the Twin View feature. (When all channels are routed through your cable box, only one signal is sent to the LCD projection TV, so you cannot use the Twin View feature.)
:} | ::}o, :_ s©;_{; | s | :Ty |
Connect the Cable TV cable to the LCD projection TV's VHF/UHF jack.
Using a coaxial cable, connect the LCD projection TV's TO CONVERTER jack to the cable box's IN jack. The LCD projection TV's internal converter allows you to switch between unscrambled signals coming straight into the LCD projection TV and scrambled signals coming in through the cable box, eliminating the need for an external splitter.
Using a coaxial cable, connect the cable box's OUT jack to the VCR's IN jack.
Using AUDIO and S VIDEO cables, connect the VCR's AUDIO and S VIDEO OUT jacks to the LCD projection TV's AUDIO and S VIDEO IN jacks.
Using a coaxial cable, connect the VCR's OUT jack to the LCD projection TV's AUX jack.
To view scrambled channels, set your LCDprojection TV to AUX 3 or 4
(dependingon your cable box output). Changechannelsusing your cable box.
3O
