Sony LF-X1, LF-X5 Resetting Factory Defaults, Initializing the Base Station, 135

Resetting Factory Defaults

Before initializing the

LocationFreeTV

•Check that the base station is turned on. Bring the monitor close to the base station.

•Be sure to initialize the LocationFreeTV with the AC power adapter attached and the battery inserted.

•The monitor restarts during the initialization process. This is not a malfunction.

Initializing the Base Station

To reset all settings, or just the connection settings, you need to initialize the base station.

1 Turn off the base station.

2 While pressing CLR CFG on the rear of the base station, turn on the POWER.

Hold down CLR CFG until the NetAV indicator on the front of the base station lights red.

Rear of	Front of
base station	base station

CLR CFG NetAV indicator

Resetting Factory Defaults

Resetting All Settings

You can reset all settings to the factory defaults. Note, however, that all saved data will be lost.

Notes

•Initialization deletes all of your data, including mail you have received, images stored in the album, as well as web pages and favorites you have saved.

•Be sure to follow the instructions for “Initializing the Base Station” before performing the following procedure.

1 Open the [Settings] window and select [Basic].

The [Basic] window appears.

2	Select [Initialize].	Functions
	The [Initialize] window appears.	and
3	Select [Clear All].	Settings

The [Clear All] window appears.

4 Carefully read the precautions shown on the screen, initialize the base station

(1 This page), and select [OK]. All settings are reset.

Note

After the monitor automatically restarts during

initialization, verify that	appears at the
top of the screen.

Initializing Internet

Connection/Wireless

Connection

•Use the following procedure to reset the settings for the Internet connection, wireless connection, and connection mode.

•Be sure to follow the instructions for “Initializing the Base Station” before performing the following procedure.

135

Continued