Sony LF-X1, LF-X5 Setting up multiple external devices, Select the type of the on-screen remote

Connecting two devices to a single input terminal

Set the device directly connected to the unit as the first device.

When connecting an all-in-one device (e.g., a VCR+DVD player)

The second remote control is automatically set when you select a device displayed as all- in-one device from the [Type] list (e.g., Sony “VCR+DVD Player”). Touch the [Switch] button on the on-screen remote control to switch between the remote control for the VCR and the remote control for the DVD player.

7 Select [Back].

The [Remote] window reappears.

8 Select [Back] or [Exit].

The [TV/Video] window reappears.

9 Select [Settings], then select [Exit].

10 Open the [Index] window.

[Video 1] or [Video 2] in the window is now replaced with the type name of the selected on-screen remote control.

Example: When you have set the remote control for a DVD player to [Video 1], [Video 1] is replaced with [DVD Player].

Using the On-screen Remote Control

11 Select the type of the on-screen remote
	Setup
control.
The remote control appears at the right side	and
of the screen, so that you can control the
connected equipment.	Connections
across the screen from left to right or right to left,
z Tip
You can change channels by sliding the stylus
if the connected equipment contains a tuner, such
as cable TV set-top box. For more information,
see “Watching TV and Video” (1 page 65).
12 After checking that the connected devices
operate properly, remove the backing paper
from the IR Blaster.

Backing paper

13 Secure the IR Blaster in the location you determined in step 2 (1 page 33).

Setting up multiple external devices

First, connect the devices you want to use.

1 Follow steps 3 to 6 in “Setting Up and Connecting the IR Blaster” (1 page 33) to configure the first device.

2 Select the make and type of the second device (the one connected via the first device) from the [Make] list in the lower part of the window. Make sure you can turn the device on and off.

3 Secure each IR Blaster in the location you determined in step 2 (1 page 33).

35

Continued