Sony LF-X1, LF-X5 Using the On- screen Remote Control, Setting Up and Connecting the IR Blaster

•Some devices may not have a [Power] button (e.g. DVR). In this case, as well, use the on- screen remote to display [Video 1] or [Video 2] and confirm that the buttons are enabled.

12 Select [Back].

The [Remote] window reappears.

13 Select [Back].

The [TV/Video] window reappears.

14 Select [Settings], then select [Exit].

Using the On-screen Remote Control

Using the On- screen Remote Control

Configure the on-screen remote control for external devices connected to the base station using the IR Blaster (supplied). For more on connecting other devices, see “Connecting Other Devices” (1 page 21).

Setting Up and Connecting the IR Blaster

1 Connect the IR Blaster to the IR BLASTER port on the base station.

Setup and Connections

to IR BLASTER port

2 Position the IR Blaster above the infrared receiver on the external device.

To locate the infrared receiver, see the operating instructions for the connected device. Make sure to place the IR Blaster just above the infrared receiver.

33

Continued