Sony LF-X1, LF-X5 Wireless Connection On, Setting Up to Use Public Wireless Access

Wireless

Connection On the

Go

1 Open the [Settings] window and select [Monitor].

The [Monitor] window appears.

2 Select [Wireless] under [On the go].

3 Select [Back].

The connection mode is changed.

Note

For more on setting the IP address in [Wireless] under [On the go], refer to “Setting Up

the Monitor” on page 54. In that case, however, step 2 should read “Select [Settings] to the right of [On the go - Wireless].”

Also, for more on settings necessary for watching TV, refer to “Setting Up NetAV” on page 56. The settings under “Setting Up to Use Public Wireless Access” on this page are also necessary.

Wireless Connection On the Go

Setting Up to Use Public

Wireless Access	Setup
Follow the steps below to configure the monitor	and
so it can use public wireless access at cafes,	Connections
The following is an example of how to establish a
bookstores, and other locations around town. For
convenience, you can save the configuration of
public wireless access you visit frequently.
connection. The actual connection method differs
depending on the public wireless access provider.
For details, refer to the instruction manual
provided by your public wireless access provider.
1 Open the [Settings] window and select
[Monitor].
The [Monitor] window appears.
2 Select [Settings] to the right of [Wireless]
under [On the go].
The [On the go-Wireless] window appears.
3 Select [Public Wireless Access].
The [Public Wireless Access] window
appears.
A short while after the [Public Wireless
Access] window appears, a list of detected
access points is displayed.
Note

When the monitor is not set to [On the go-

Wireless], you cannot select [Public Wireless

Access].

zTip

You can also update the wireless network list by selecting [Search/Update].

49

Continued