Sony LF-X1, LF-X5 Access ID*1, Internet connection password*2, DNS1*3 and DNS2*4 parameters

3 Select [Internet Connection].

The [Internet Connection] window appears.

4 Select the [Settings] button to the right of [LAN (PPPoE)].

The [LAN (PPPoE)] window appears.

5 Input the proper values for each item, and select [Set], then select [Back].

1Internet service provider (ISP) name

This is used to identify your ISP. Most ISPs do not require this entry. Enter the name only when required by your ISP.

2Access ID*1

This is used to verify that the user has authorization to connect to the Internet.

3Internet connection password*2

This is used to verify that the user has authorization to connect to the Internet. For security, password characters are shown as asterisks.

4DNS1*3 and DNS2*4 parameters

Enter the DNS addresses specified by your ISP. If you select the check box next to [Automatic DNS configuration], the addresses are automatically acquired.

Note that some ISPs do not allow addresses to be acquired automatically.

zTip

To input the DNS address manually, clear the check box next to [Automatic DNS configuration], input values for [DNS1] and [DNS2], and then select [Set].

5[Set] button

6 [Back] button

The following terms may differ depending on your ISP. For more information, see the documents supplied by your ISP.

*1	Connection ID is also known as user ID, PPP
	login name, network ID, connection login
	name, account name, logon name, login ID,
*2	or connection account.
	Password is also known as PPP password,
	network password, connection password, or
*3	login password.
	DNS1 is also known as primary DNS server,
*4	primary name server, or domain name server.
	DNS2 is also known as secondary DNS
	server, secondary name server, or domain
	name server.

The [Internet Connection] window reappears.

zTips

•For details on character entry, see “Entering Characters” (1 page 116).

•You may capture and save the configured setup screen for future reference (1 page 70).

6 Select [LAN (PPPoE)].

LAN (PPPoE)

A confirmation window appears.

Note

PPPoE connections are not guaranteed for all DSL providers.

7 Select [OK].

This sets the configuration for “LAN (PPPoE)”.

42