Sony LF-X1, LF-X5 Establishing the NetAV connection, Quitting NetAV, Changing TV channels

Establishing the NetAV connection

1 Turn on the monitor.

zTip

Make sure the monitor is in “On the go mode”.

2 Touch anywhere on the screen. The on-screen remote appears.

3 Select [NetAV].

[NetAV]

After a brief interval the monitor connects to your

base station at home, and appears at the

top of the screen. After appears, you can operate the monitor in the same way you do at home.

[NetAV]

Connecting with NetAV

zTips

•While connected with NetAV, the NetAV indicator on the front of the base station lights green.

•You cannot use the sub-screen (LF-X1 only) or settings screens in NetAV mode. Selecting a screen other than TV, video input 1, or video input 2 in NetAV mode automatically breaks the connection with NetAV.

Quitting NetAV

Select [End] or turn off the monitor.

Changing TV channels

Using the on-screen remote, you can operate the TV screen the same way you do at home. See “Watching TV and Video” (1 page 65).

zTips

•You may not be able to watch some copyright protected programs.

•When selecting a new channel on a NetAV connection, there may be a delay before the picture appears due to buffering.

Changing the TV picture size

In NetAV mode, you can change the size of the TV picture on the monitor. Select [Resize]. A dialog box for changing the TV picture size appears and you have three choices for the TV picture size. With the factory default setting, picture is displayed on the entire screen.

Changing the streaming

In NetAV mode, you can change the streaming according to the network status.

1 Select [Rate].

A dialog message for changing the connection speed appears.

Setup and Connections

61

Continued