Sony MDS-DRE1 17GB, Checking the hot start settings, Changing the hot start settings, Do this, Functions Performance DJ, To return to normal playback

7Press the pad for the track you want to hot start.

Playback begins immediately.

To return to normal playback

Press PLAY MODE repeatedly until “HOT START” disappears.

zIn the Hot Start play mode, you can also use PLAY/PAUSE for immediate playback of the hot start tracks

Pressing PLAY/PAUSE when the unit is stopped to immediately play all the hot start tracks in the order that they were programmed.

zThe hot start settings remain available even after you exit the Hot Start play mode.

Just press PLAY MODE repeatedly to display “HOT START” and you can use the same hot start settings again.

zWhen using recordable MDs, the hot start settings remain available even after you eject the MD

With recordable MDs, the hot start settings are written into TOC data when the disc is ejected. The next time you load the MD, you can use the same hot start settings simply by pressing PLAY MODE repeatedly to display “HOT START”.

With commercial MD software, the hot start settings are erased when you eject the disc.

Notes

•During Hot Start playback, it is not possible to use the 0/) buttons or the loop function. It is also not possible to use the scrub dial during pause.

•Hot start settings are erased when a track is edited.

Checking the hot start settings

Press DISPLAY repeatedly while “HOT START” is displayed.

The hot start tracks appear in the order they were programmed.

For example: “/3 n5 n8 n1 n2/”

Changing the hot start settings

The hot start settings can be changed before beginning playback.

To		Do this*
Erase	one track	Do steps 1~2, press 0/)
		until the unwanted track blinks,
		then press EDIT/NO.
	all tracks	Do steps 1~2, then press EDIT/
		NO repeatedly.
Add a track	at beginning	1 Do steps 1~2, then press 0
		to display a blinking “0” before
		the first track.
		2 Do steps 3~5.
	in middle	1 Do steps 1~2, then press
		0/)until the track after
		which you want to add the new
		track blinks.
		2 Press AMS to display a
		blinking “0”.
		3 Do steps 3~5.
	to end	1 Do steps 1~2, then press )
		to display a blinking “0” after
		the last track.
		2 Do steps 3~5.
Change a track		1 Do steps 1~2, then press
		0/)repeatedly so that the
		unwanted track blinks.
		2 Do steps 3~5.

*See “Starting Tracks as Quickly as Possible (Hot Start)” for details on steps 1~2 and 3~5.

Functions Performance DJ

17GB