Display

BANK 1

REHEARSAL

TRACK

DISC

 

 

 

 

OVER

BANK 2

BACK TRACK

 

 

 

 

 

L.SYNC

0

BANK 3

RECORDING

 

 

 

 

 

PROGRAM

4

BANK 4

 

 

 

 

 

 

8

 

 

%

 

 

 

HOT START

12

 

 

 

 

 

 

 

20

 

REC

 

TR

M

S

F

TOC

40

 

 

 

LOOP

REPEAT 1

A.CUE

 

 

 

 

 

RELOOP

A-B

A.PAUSE

EDIT MONO

L R -dB

1 BANK indicators (12)9 MONO indicator

Light to display the current group (BANK) of tracks

Lights during playback of monaural audio signals.

assigned to the pads.

(This unit is not capable of recording in monaural.)

2 Track number and counter display0 Level meters

• During playback or recording, it displays the track

Display the audio signal levels during playback and

number and track time. The track time blinks when

recording.

there are less than 10 seconds left on the track

!¡ HOT START indicator (16)

during playback.

Lights when the unit is set to the Hot Start play mode.

• During stop, it displays the total number of tracks

!™ PROGRAM indicator (20)

and the disc time.

Lights when the unit is set to the Program play mode.

3 Status indicators!£ L.SYNC indicator (24)

Parts of Functions and Names

Light to display the current state of operation. (Playback, record, pause, etc.)

4RELOOP indicator (16)

Lights to indicate that a loop has been memorized.

5LOOP indicator (16)

Blinks when a loop is being set. Lights when looping.

6REPEAT indicators (19)

•Light during repeat playback.

“REPEAT” lights when set to repeat the entire disc. “REPEAT 1” lights when set to repeat just one track.

•“1” lights when the unit is set to stop automatically after each track.

7Auto mode indicators (14)

Light during auto mode playback.

•“A.CUE” lights when the unit is set to skip over the blank space at the beginning of each track and pause just before the sound begins (AUTO CUE).

•“A.PAUSE” lights when the unit is set to pause at

the beginning of each track (AUTO PAUSE).

8TOC indicators (23, 27)

•“TOC” lights to indicate the presence of TOC data that has not been written to the disc. “TOC” blinks when writing the TOC data.

•“TOC EDIT” lights during edit operations.

Lights when the unit is set to assign track numbers automatically during analog recording.

!¢ Name display

Displays disc and track names, Edit Menu parameters, and Setup Menu parameters (etc.).

!￿ DISC indicator

Lights when the disc name (etc.) is shown in the name display.

!§ TRACK indicator

Lights when the track name (etc.) is shown in the name display.

!¶ BACK TRACK RECORDING indicators (25)

“BACK TRACK RECORDING” lights and the disc image rotates during backtrack recording.

When you stop recording, the indicator blinks as the unit writes the recorded information to the disc.

If the disc image starts rotating faster and the indicator blinks during recording, stop using the pad, scrub dial, and loop functions until the disc image slows down and the indicator lights steadily. Continuing to use these functions may cause the unit to stop recording.

!• REHEARSAL display (28)

Lights during rehearsal playback.

9GB