Functions Performance DJ

Looping Part of a Track

Setting a loop allows you to play a certain part of the current track repeatedly without any pauses or breaks. In addition, the loop points are stored even after you exit the loop, making it easy to return to the same loop.

RELOOP

LOOP INLOOP OUT1During playback, press LOOP IN at a point where you want the loop to start.

“LOOP” blinks in the display.

2Press LOOP OUT at the point where you want the loop to end.

“LOOP” lights steadily and the loop begins.

To exit the loop

Press LOOP OUT again.

Playback proceeds as normal when it reaches the loop out point. “RELOOP” lights in the display to indicate that the loop position has been stored.

To return to the previous loop

Press RELOOP.

Playback returns to the loop in point and starts looping.

Notes

•It is not possible to set a loop longer than 20 seconds. The loop set mode deactivates automatically if you do not press LOOP OUT within 20 seconds of pressing LOOP IN.

•Loops cannot span two (or more) tracks. The loop set mode deactivates automatically if the track changes before you press

LOOP OUT.

•The loop position is erased when :

-You stop playback

-You set another loop

-Turn the scrub dial during pause

•The loop function is not possible if a pad with a red indicator was used to start playback from a cue point.

•In some cases, when you try to set another loop, “Impossible” is displayed and you will not be able to set another loop. If this occurs, stop playback and then set the loop.

Starting Tracks as Quickly as Possible (Hot Start)

The Hot Start function allows you specify up to 8 tracks. You can store the beginning of a track in memory to enable playback of that track to start quicker than normal when you press the track’s pad.

You can specify any 8 tracks for use with this function.

EDIT/NO

AMS

ENTER/YES PLAY MODE

Pads

0/)

1During stop, press EDIT/NO twice to display “Setup Menu”.2Turn AMS to display “Hot start ?”, then press AMS.

“/0/” blinks in the display.

3Turn AMS to display the number of the track you want to hot start, then press AMS.

The selected track number stops blinking and another “0” appears to indicate that the unit is ready for another track number.

If you make a mistake

Press 0or )repeatedly so that the mistaken track number blink, turn AMS to change the track number, then press AMS.

4Repeat step 3 to specify up to 8 tracks.

“Multi Full!” appears when you enter the 8th track.

5When you’ve finished, press ENTER/YES.

“Complete!!” is displayed and the hot start settings are complete.

6Press PLAY MODE repeatedly to display “HOT START”.

“Memorizing” appears and the pad indicators blink while the unit assigns the tracks to the respective pads. E.g., if your hot start setting was “/2 n8 n5/”:

–Track 2 is assigned to Pad 1

–Track 8 is assigned to Pad 2

–Track 5 is assigned to Pad 3

The indicators above the corresponding pads light red.

16GB