Functions Performance DJ

Assigning Cue Points to Pads

zYou can also erase cue points from pad memory using the Setup Menu

1 Press STOP to stop playback.

2 Press EDIT/NO twice to display “Setup Menu”.

3 Turn AMS to display “PAD Erase?”, then push AMS. “–Rehearsal–” blinks in the display and unit repeats a 3 second section starting from one of the cue points.

4 Turn AMS to select the cue point you want to erase.

5 Press AMS to erase the cue point.

“Complete!!” appears in the display, and the corresponding pad indicator lights green.

Notes

•Only one cue point can be memorized per track. If you try to assign another cue point to a pad that already has a memorized cue point, “Over Mem?” appears in the display.

–To erase the previous cue point and assign the new one, press ENTER/YES or the press the same pad again.

–To cancel the pad memory function, press EDIT/NO or STOP.

•Cue points can only be assigned to pads which correspond to their track numbers. For example, the cue point in track 2 can only be assigned to pad 2 (BANK 1).

•To assign multiple cue points within a single song, first use the Divide function (see page 28) to separate the song into different tracks.

•After using a pad to start playback of a track, it is not possible to use the 0/)buttons or the loop function. It is also not possible to use the scrub dial during pause.

•The cue points are erased when the disc is ejected.

Auto Pausing at the

Beginning of a Track

You can set the unit to pause automatically at the beginning of each track (Auto Pause). You can also set the unit to skip the blank space at the beginning of the track and pause right before the sound begins (Auto Cue).

EDIT/NO

AMS

AUTO CUE

SINGLE

 

AUTO PAUSE

PLAY

 

AUTO OFF

 

1During stop, press AUTO PAUSE or AUTO CUE.

•Press AUTO PAUSE to light the “A.PAUSE” indicator and set the unit to pause at the beginning of each track.

•Press AUTO CUE to light the “A.CUE” indicator and set the unit to skip the blank space at the beginning of the track and pause right before the sound begins.

2Start playback.

Playback pauses either at the beginning of a track or right before sound begins on the track.

To cancel AUTO PAUSE or AUTO CUE

Press AUTO OFF during stop.

zYou can adjust the sound level Auto Cue defines as a blank space and the timing of the pause that occurs once a blank space has been detected.

1 Press STOP to stop playback.

2 Press EDIT/NO twice to display “Setup Menu”.

3 Turn AMS to select one of the following parameters, then press AMS.

-To change the sound level defining a blank space : AC (T)

-To change the timing of the pause : AC (O)

4Turn AMS (or scrub dial) to set the value you desire, then press AMS.

5Press EDIT/NO to exit the Setup Menu.

The settings are retained even if the power is turned off. The adjustable range of each parameter is as follows. The numbers in parenthesis are the default values.

AC (T) : –72 dB to 0 dB in 2 dB steps (–50 dB)

AC (O) : –9s85f to +9s85f in 1f steps (0s00f)

When AC (O) is set to a negative (–) value, the unit pauses by counting backwards from the point where it detected the blank space.

To cancel without completing the settings, press EDIT/NO. This returns the unit to the factory settings.

14GB