Sony MDS-DRE1 21GB, Changing the program contents, Resuming Playback After Stopping (Resume Play), Do this, Press PLAY/PAUSE, Options Playback Other

AMS

EDIT/NO

STOP

PLAY/PAUSE

1 Press EDIT/NO twice to display “Setup Menu”.

2 Turn AMS to display “Resume”, then press AMS. The display starts blinking.

3 Turn AMS to display “Resume Play”, then press AMS.

4 Press EDIT/NO to exit the Setup Menu. This activates the resume play function.

5 Press STOP during playback to stop playback.

6 Press PLAY/PAUSE.

Playback resumes from the point where it was stopped in step 5.

To cancel the resume play function

Select “Resume Off” in step 3, press AMS, then proceed to step 4.

Note

The resume point is erased when:

• The MD is ejected

• PLAY MODE is pressed

Resuming Playback After Stopping (Resume Play)

This function allows you to set the unit to memorize the point where playback stopped, so you can resume playback from the same point the next time you press

PLAY/PAUSE.

Changing the program contents

The program contents can be changed before beginning playback.

To		Do this*
Erase	one track	Do steps 1~2, press 0/)
		until the unwanted track blinks,
		then press EDIT/NO.
	all tracks	Do steps 1~2, then press EDIT/
		NO repeatedly.
Add a track	at beginning	1 Do steps 1~2, then press 0
		to display a blinking “0” before
		the first track.
		2 Do steps 3~5.
	in middle	1 Do steps 1~2, then press
		0/)until the track after
		which you want to add the new
		track blinks.
		2 Press AMS to display a
		blinking “0”.
		3 Do steps 3~5.
	to end	1 Do steps 1~2, then press )
		to display a blinking “0” after
		the last track.
		2 Do steps 3~5.
Change a track		1 Do steps 1~2, then press
		0/)repeatedly so that the
		unwanted track blinks.
		2 Do steps 3~5.

*See “Playing Tracks in a Different Order (Program Play)” for details on steps 1~2 and 3~5.

Options Playback Other

21GB