Playing Tracks in a Different Order (Program Play)

This function lets you playback tracks in any order by creating programs containing up to 25 tracks.

EDIT/NO

AMS

ENTER/YES PLAY MODE

0/)

PLAY/PAUSE

To return to normal playback

Press PLAY MODE repeatedly until “PROGRAM” disappears.

zYou can also play the program by pressing the pads

Playback starts from the selected track and proceeds in the programmed order. If you program more than 8 tracks, use BANK to switch banks before pressing a pad.

zThe program remains available even after you exit the Program mode.

Press PLAY MODE repeatedly to display “PROGRAM” again and you can play the same program.

Options Playback Other

1During stop, press EDIT/NO twice to display “Setup Menu”.

2Turn AMS to display “Program ?”, then press AMS.

“/0/” blinks in the display.

3Turn AMS to display the number of the track you want to program, then press AMS.

The selected track number stops blinking and another “0” appears to indicate that the unit is ready for another track number.

If you make a mistake

Press 0or )repeatedly so that the mistaken track number blink, turn AMS to change the track number, then press AMS.

4Repeat Step 3 to program up to 25 tracks.

“ProgramFull” appears when you enter the 25th track. Tracks are added in the location of the blinking “0”. The total time of the program is displayed each time you program a track.

5When you’ve finished, press ENTER/YES.

“Complete!!” is displayed and the program is complete.

6Press PLAY MODE repeatedly to display “PROGRAM”.

The unit assigns the tracks to the respective pads. E.g., if your program was “/2 n8 n5/”:

–Track 2 is assigned to Pad 1

–Track 8 is assigned to Pad 2

–Track 5 is assigned to Pad 3

7Press PLAY/PAUSE.

The tracks are played in the programmed order.

zWhen using recordable MDs, the program remains available even after you eject the MD

With recordable MDs, the program information is written into TOC data when the disc is ejected. The next time you load the MD, you can play the same program simply by pressing PLAY MODE repeatedly to display “PROGRAM”.

With commercial MD software, program information is erased when you eject the disc.

Notes

•The program is erased when a track is edited.

•Cue points cannot be set during Program playback.

Checking the program contents

Press DISPLAY repeatedly while “PROGRAM” is displayed.

The programmed tracks appear in the order they were programmed.

For example: “/3 n5 n8 n1 n2/”

20GB