Sony MDS-DRE1 Parts of, button (12), RELOOP button, LOOP IN button, Elapsed time :, LOOP OUT button, Remaining time :, Playback track :, !¡ Scrub dial (13)

UNDO

CUE

PAUSE

OFF

AUTO MODE

							INPUT
						OPT	COAX ANLG
						REC VOL
						0	10
			AMS
BANK	ENTER/YES	EDIT/NO	PLAY MODE	REPEAT	SENGLE	DISPLAY
					PLAY
			PUSH ENTER
	1		2	3
						4
							RELOOP
							IN
	5		6	7			OUT
						8
							LOOP

Functions and Names

PITCH SPEED

REC

REC PAUSE STOP

CUE

PLAY/PAUSE

Parts of

0PLAY/PAUSE button / indicator (12)

•Press during stop or pause to start playback.

•Press during playback to pause.

Lights during playback, blinks during pause.

!¡ Scrub dial (13)

•Turn during playback to change the playback speed.

•Turn during pause to play the MD in sync with the dial movement.

•Turn while holding CUE to adjust the cue point.

!™ PITCH slider (15)

Adjusts the pitch.

!£ SPEED slider (15)

Adjusts the speed. !¢ ) button (12)

Hold down for fast forward.

!￿ LOOP buttons (16)

Use to set a loop. The loop remains in memory after you exit it, so you can quickly return to the same loop.

RELOOP button

Press after exiting the loop to return to the start point of the memorized loop and resume looping.

LOOP IN button

Press to set the loop start point.

LOOP OUT button

Press to set the loop end point and start looping. Press during the loop to exit.

!§ DISPLAY button (18, 33)

Press to switch the information shown in the display. Each press changes the display mode as follows:

•Remaining time : The counter displays the time remaining on the current track.

•Elapsed time : The counter displays the time elapsed on the current track.

When the play mode is set to Program or Hot Start, the following is also possible:

• Playback track : The numbers of the programmed or hot start tracks are shown in the title area and the track being played blinks. The counter displays the time remaining on the current track.

!¶ REC VOL knob (24)

Use to adjust the level of the signal input from the LINE IN jacks during analog recording. This function only operates when INPUT is set to “ANLG.”

!• INPUT switch (23)

Use to select the input jack for the recording program source.

!ª SINGLE PLAY button (15, 19)

•Press to set the unit to stop automatically after each track.

•Press during repeat playback to select one of the following repeat modes:

–Single repeat (repeats the current track).

–Disc repeat (repeats all tracks on the disc).

(continued)

7GB