Sony MDS-DRE1 33GB, Copying a disc or track name (Name Copy)

6Press DISPLAY repeatedly to select a character type:

To select	Press DISPLAY repeatedly until
Uppercase letters	“A” appears in the display
Lowercase letters	“a” appears in the display
Numbers	“0” appears in the display

7Turn AMS or the scrub dial to select the character.

The selected character blinks.

Characters appear in the following order:

Letters /numbers /symbols You can use the following symbols:

! ” # $ % & ’ ( ) * + , – . / : ; < = > ? @ _ `

You can press DISPLAY to change the character type (step 6) at any time.

8Press AMS or ENTER/YES to enter the selected character.

The character selected in step 7 lights steadily, and the cursor shifts to the right, blinks, and waits for the input of the next character.

BANK 1 REHEARSAL TRACK

						20
TR	M	S	F			40
				L	R -dB

9Repeat Steps 7 and 8 to enter the complete title.

If you entered the wrong character

Press 0or )until the character to be corrected starts blinking, then repeat Steps 7 and 8 to enter the correct character.

To erase a character

Press 0or )until the character to be erased starts blinking, then press EDIT/NO. Pressing EDIT/NO repeatedly allows you to erase several characters in order.

To enter a space

Press AMS while the cursor is blinking.

10Press ENTER/YES.

This completes the disc or track naming procedure. The disc or track name appears in the display.

To cancel without labeling

Press STOP.

Notes

You cannot enter track names during backtrack recording.

Copying a disc or track name (Name Copy)

You can copy a disc or track name and use it to name another track within the same disc or the disc itself.

1During stop, play, or pause mode, press EDIT/NO to display the Edit Menu.

2Turn AMS to display “Name ?”, then press AMS.

3Turn AMS to display “Nm Copy ?”, then press AMS.

4Turn AMS to specify whether you wish to copy the disc or track name.

•To copy the disc name, turn AMS to display “Disc”

•To copy the track name, turn AMS so that the track number with the name you want to copy blinks in the display.

5Press AMS.

If “No Name” is displayed, no name has been entered for the disc or selected track number.

6Turn AMS to specify where you want to copy the name to.

•To copy the name as the disc name, turn AMS to display “Disc”

•To copy the name as a track name, turn AMS so that the track number you want to copy the name to blinks in the display.

7Press AMS.

“Complete!!” appears for a few seconds and the disc or track name is copied.

If “Overwrite?” appears in the display

The disc or track you selected in step 6 already has a name. To continue and replace the previous name with the one selected in step 4, press AMS.

To cancel without copying the name

Press EDIT/NO or STOP.

MD Recorded a Editing

33GB