4 Press (ENTER) momentarily.
x
5 To continue entering tracks, repeat steps
3 and 4.
6 When you finish entering tracks, press (MENU) twice.
Notes
•“**Wait**” appears on the display while the unit is reading the data, or if a disc has not been inserted into the unit.
•“*Mem FULL*” appears on the display if you try to enter more than 24 tracks into a program.
•Repeat play and shuffle play will be suspended until Program Edit mode is over.
Erasing an entire program
1 During CD/MD playback, press (MENU), then press either side of (DISC/PRST) repeatedly until “PGM Sel” appears.
2
3 Press the
4 Press (ENTER) for 2 seconds.
The entire program is erased.
5 Press (MENU) twice.
Playing the stored program
Changing the disc order on the CD/MD unit will not affect program memory play.
During CD/MD playback, press (3) (PGM) to play the stored program.
PGM on y PGM off
To return to normal play mode, select “PGM off.”
Notes
•“NO Data” appears on the display if no track is stored in the program.
•If a track stored in program memory is not on a disc in the magazine, the track will be skipped.
•If the discs in the magazine contain no tracks stored in program memory, or if the program information has not been loaded yet, “Not Ready” appears.
Adding tracks to the program
1 During CD/MD playback, press (MENU), then press either side of (DISC/PRST) repeatedly until “PGM Sel” appears.
2 Press (ENTER).
When adding a track to the end of a program, skip step 3.
3 Press either side of (DISC/PRST) repeatedly to select the program number where you want to insert a new track.
Program No.
4 Press (SEEK/AMS) to select the new track.
14