Labeling an MD

You can label your recorded MDs and tracks. You can enter up to 1,700 characters for labels per disc (disc title and track title included).

7 Enter the characters.

1Press the (+) side of (DISC/PRST) to select desired characters.

tA t B t C t … x t y t z

…# T “ T ! T … 2 T 1 T 0 T

Caution

Do not perform this procedure while driving, as it diverts your attention from the road.

Note

Repeat play, shuffle play, and program play will be suspended until the name edit mode is over.

Labeling a track

1 While playing the MD you want to edit, press (MENU).

2 Press either side of (DISC/PRST) repeatedly until “Name Edit” appears.

3 Press (ENTER).

4 While “Track” is flashing, press (ENTER) to select track name edit.

5 Press either side of (SEEK/AMS) repeatedly to select the track you want to label.

If you press the (–) side of (DISC/PRST) repeatedly, the characters will appear in reverse order.

Each time you press (DSPL), the character type changes as follows:

A t a t0 t A

If you want to put a blank space between characters, select “.”

2Press the (+) side of (SEEK/AMS) after locating a desired character.

If you press the (–) side of (SEEK/AMS), you can move back to the left.

3Repeat steps 1 and 2 to enter the entire title.

8 Press (ENTER).

“Complete!” appears, and the selected title is registered.

9 Press (MENU) twice.

To cancel the labeling procedure, press (MENU) twice anywhere before step 8.

Selected track No.

6 Press (ENTER).

The unit will repeat the track during the labeling procedure.

Labeling an MD

After step 3, press the (–) side of (SEEK/AMS) to select disc name edit, and go to step 6.

The unit will repeat the disc during the labeling procedure.

27