Changing the sound and display settings

The following items can be set:

Set Up

•Clock (page 9)

•Beep — to turn the beeps on or off.

•RM (Rotary Commander) — to change the operative direction of the controls of the rotary commander.

—Select “norm” to use the rotary commamder as the factory-set position.

—Select “rev” when you mount the rotary commander on the right side of the steering column.

•English/Français/Español — to select the display language.

Display

•D.Info (Dual Information) — to display the clock and the play mode at the same time (on).

•SA (Spectrum Analyser) — to change the display pattern of the equalizer display.

•Dimmer — to change the brightness of the display.

—Select “Auto” to dim the display only when you turn the lights on.

—Select “on” to dim the display.

—Select “off” to deactivate the Dimmer. •Contrast — to adjust the contrast if the

indications on the display are not recognizable because of the unit’s installation position.

•M.Dspl (Motion Display) — to select the Motion Display mode from “1,” “2” and “off.”

•A.Scrl (Auto Scroll) (page 11)

Sound

•Loud (Loudness) — to enjoy bass and treble even at low volumes. The bass and treble will be reinforced.

1 Press (MENU).

2 Press either side of (DISC/PRST) repeatedly until the desired item appears.

Each time you press the (–) side of (DISC/PRST), the item changes as follows:

Example:

Clock t Beep t RM t English/Français/

Español t D.Info t SA t Dimmer t

Contrast tM.Dspl t A.Scrl* t Loud

*When no CD is playing on a unit with the CD TEXT function or no MD is playing, this item will not appear.

3 Press the (+) side of (SEEK/AMS) to select the desired setting (Example: on or off).

4 Press (ENTER).

After the mode setting is completed, the display returns to normal play mode.

Note

The displayed item will differ depending on the source.

Tip

You can easily switch among categories (“Set Up,” “Display,” “Sound,” “Play Mode,” and “Edit Mode”) by pressing either side of (DISC/PRST) for 2 seconds.

35