CD/MD playback

Problem

Cause/Solution

 

 

A disc cannot be loaded.

•Another MD is already loaded.

 

•The MD is forcibly inserted upside down or in the wrong

 

way.

 

 

Playback does not begin.

Defective MD or dirty CD.

 

 

A disc is automatically ejected.

The ambient temperature exceeds 50°C (122°F).

 

 

The operation buttons do not

Press the reset button.

function.

 

 

 

The sound skips from vibration.

•The unit is installed at an angle of more than 20°.

 

•The unit is not installed in a sturdy part of the car.

 

 

The sound skips.

Dirty or defective disc

 

 

Cannot turn off the “--------”

You cannot label CDs unless you connect a CD unit with the

indication.

CUSTOM FILE function.

 

t Press (LIST) for 2 seconds.

Recording is not possible. •The MD is protected against erasure. (“Protected” appears.)

tSlide the tab to close the slot (see page 4). •A premastered MD is inserted in the unit.

tReplace the disc with a recordable MD.

•The time remaining on the MD is insufficient for the recording. (“Disc FULL” appears.)

tReplace the disc with a recordable MD that has sufficient time remaining, or erase unnecessary tracks.

•You have started the engine during Timer-off recording or REC Continue mode.

tDo not start the engine during Timer-off recording or REC Continue mode.

Recorded sounds drop. You have performed the recording while the unit was subject to excessive vibration (while driving on a rough road, etc.).

45