Recording from a CD or MD by the track

— Track recording

1 Press (OPEN) and insert the MD to be recorded on.

(See “Playing a disc” on page 10.)

2 Play the CD or MD from which you want to record.

3 Press (MD REC).

Remaining recordable time

Information of the playing CD

The unit stands by for recording with “z” flashing and the buttons for recording ((MD REC), (REC STOP), and (REC MENU)) lit in amber.

4 Press (REC MENU) repeatedly until “Track. REC” appears.

Each time you press (REC MENU), recording mode changes as follows:

 

B

Track. REC

 

B Disc. REC

 

 

 

Normal REC b

PGM. REC* b

 

 

 

 

 

 

 

 

 

 

*If you did not create a program, this item will not appear.

Information of the playing CD

If you want the actual recording to start from the point on the track where you press (MD REC) next, select “Normal REC” in this step.

5 Press either side of (SEEK/AMS) repeatedly to select the track you want to record.

6 Press (MD REC) again to start recording.

MD’s elapsed

MD’s track No. recording time

The unit locates the beginning of the selected track and starts recording.

Then “z” stops flashing and the buttons for recording ((MD REC), (REC STOP), and (REC MENU)) light in red.

When the recording of the track is completed, the unit beeps and automatically stands by for further recording while the CD or MD continues to play.

To cancel the recording or recording stand-by, press (REC STOP).

Inserting the MD to record upon afterwards

You can still start recording even if a CD or MD in the connected CD/MD unit is already playing and an MD is yet to be inserted into this MD recorder.

1 Press (MD REC).

2 Insert an MD while “REC NO Disc” is displayed (within 10 seconds after step 1).

3 Press (REC MENU) repeatedly until “Track. REC” appears.

4 Press (MD REC) again to start recording.

Note

Be sure to insert an MD while “REC NO Disc” is displayed. If the indication disappears, recording stand-by is canceled.

18