Continuing recording after turning the ignition off
— REC Continue mode
1 Press (OPEN) and insert the MD to be recorded on.
2 Play the CD or MD from which you want to record.
3 Press (MD REC).
4 Press (REC MENU) repeatedly to select “Disc. REC,” “Track. REC,” or “PGM. REC.”
5 Press (MD REC) again to start recording.
6 Press (REC MENU) repeatedly until “Continue on” appears.
Recording continue indication
7 Turn the ignition off and detach the front panel before you leave the car.
During REC Continue mode, the unit keeps beeping to indicate the state of the unit, and stops beeping when recording is completed. When you turn the ignition to the ACC position and attach the front panel again, “REC Complete!” appears on the display if recording is completed successfully.
Notes
•Frequent use of REC Continue mode feature may cause battery drain. Make sure that the battery is well charged.
•Be sure not to start the engine of the car again during REC Continue mode. Recording may fail.
•When an optional TV/video unit is connected, the monitor stays on during
MD — Disc recording
1 Press (OPEN) and insert the MD to be recorded on.
(See “Playing a disc” on page 10.)
2 Play the CD or MD from which you want to record.
3 Press (MD REC).
The unit stands by for recording with “z” flashing and the buttons for recording ((MD REC), (REC STOP), and (REC MENU)) lit in amber.
4 Press (REC MENU) repeatedly until “Disc. REC” appears.
5 Press either side of (DISC/PRST) repeatedly to select the disc from which you want to record.
6 Press either side of (SEEK/AMS) repeatedly to select the track from which you want to start recording.
If you want to record the whole disc, be sure to choose the first track.
7 Press (MD REC) again to start recording. The recording starts from the beginning of the currently playing track.
Then “z” stops flashing and the buttons for recording ((MD REC), (REC STOP), and (REC MENU)) light in red.
continue to next page t
19