— Station Memo
You can assign a name to each radio station and store it in memory. The name of the station currently tuned in appears on the display. You can assign a name using up to 8 characters for a station.
Storing the station names
1 Tune in a station whose name you want to store.
2 Press (MENU), then press either side of (DISC/PRST) repeatedly until “Name Edit” appears.
3 Press (ENTER).
4 Enter the characters.
1Press the (+) side of (DISC/PRST) repeatedly to select the desired characters.
(A t B t C t ··· Z t 0 t 1 t 2 t
··· 9 t + t – t * t / t \ t > t < t . t
)
If you press the
If you want to put a blank space between 2 characters, select “
.”
2Press the (+) side of (SEEK/AMS) after locating the desired character.
If you press the
3Repeat steps 1 and 2 to enter the entire name.
5 Press (ENTER).
Station name
Frequency
Tips
•To erase or correct a name, enter “ ” for each character.
•There is another way to start storing station names: Press (LIST) for 2 seconds instead of performing steps 2 and 3. You can also complete the operation by pressing (LIST) for 2 seconds instead of performing step 5.
Erasing a station name
1 During radio reception, press (MENU), then press either side of (DISC/PRST) repeatedly until “Name Del” appears.
2
3 Press either side of (DISC/PRST) repeatedly to select the station whose name you want to erase.
4 Press (ENTER) for 2 seconds.
The name is erased.
Repeat steps 3 to 4 if you want to erase other names.
5 Press (MENU) twice.
The unit returns to normal radio reception mode.
Note
If you have already erased all of the station names, “NO Data” appears in step 4.
31