5 Press (ENTER).
The selected track is inserted at that program number, and the succeeding tracks are renumbered.
To continue inserting tracks, repeat steps 3 to 5.
6 Press (MENU) twice.
Note
Once all 24 slots have been filled, “*Mem FULL*” appears on the display, and you cannot insert more tracks.
Erasing tracks in a program
1 During CD/MD playback, press (MENU), then press either side of (DISC/PRST) repeatedly until “PGM Sel” appears.
2
3 Press either side of (DISC/PRST) repeatedly to select the program with the track number you want to erase.
4 Press (ENTER) for 2 seconds.
The selected track is erased, and the succeeding tracks are renumbered.
5 Press (MENU) twice.
(For a CD unit with the CUSTOM FILE function)
You can label each disc with a personalized name. You can enter up to 8 characters for a disc. If you label a CD, you can locate the disc by name (page 17).
Caution
Do not use the CUSTOM FILE feature while driving, or perform any other function which could divert your attention from the road.
1
2 Press (MENU), then press either side of (DISC/PRST) repeatedly until “Name Edit” appears.
3 Press (ENTER).
Name Edit mode
The unit will repeat the disc during the labeling procedure.
4 Enter the characters.
1Press the (+) side of (DISC/PRST) repeatedly to select the desired characters.
(A t B t C t ··· Z t 0 t 1 t 2 t
··· 9 t + t – t * t / t \ t > t < t . t
)
If you press the
If you want to put a blank space between characters, select “
.”
continue to next page t
15