When the recording of all the following tracks are over, the unit beeps and automatically stands by for further recording while the CD or MD continues to play.
To cancel the recording or recording
Tip
You can continue recording even after turning off the ignition to leave the car (see “Continuing recording after turning the ignition off” on page 19).
Recording from a CD or MD in a specific track order
You must have a program created to use this function. (See “Creating a program” on page 13.)
1 Press (OPEN) and insert the MD to be recorded on.
(See “Playing a disc” on page 10.)
2 Press (MD REC).
The unit stands by for recording with “z” flashing and the buttons for recording ((MD REC), (REC STOP), and (REC MENU)) lit in amber.
3 Press (REC MENU) repeatedly until “PGM. REC” appears.
4 Press (MD REC) again to start recording. The unit locates the beginning of the selected program and starts recording. Then “z” stops flashing and the buttons for recording ((MD REC), (REC STOP), and (REC MENU)) light in red.
When the recording of the program is completed, the unit beeps and automatically stands by for further recording while the CD or MD continues to play.
To cancel the recording or recording
Notes
•If you did not create a program, “PGM. REC” will not appear in step 3.
•If you created a program that includes the MD to play on this recorder, “Not Ready” appears in step 3. In such a case, you must erase such tracks from the program.
Tip
You can continue the recording even after turning off the ignition to leave the car (see “Continuing recording after turning the ignition off” on page 19).
20