Press (ENTER).

5 Press (ENTER) to mark the dividing point.

The unit repeatedly plays the next few seconds after the marked point.

6 Press either side of (SEEK/AMS) to fine- tune the dividing point.

7 While monitoring the track, press (ENTER) at the point where you want to divide.

“Complete!” appears, and the selected track is divided.

8 To continue dividing tracks, repeat steps

4 to 7.

9 Press (MENU) twice.

To cancel the dividing procedure altogether, press (MENU) twice anywhere before step 7.

Notes

•The name applied to the original track will become the label for the first new track of the divided track, and the second one will not be labeled.

•“Impossible” appears if the unit cannot divide a track any more because the MD has been edited too many times. This is due to the system limitation of MDs and is not a malfunction of the unit.

Tip

To combine the divided tracks again, use the Combine function (see page 25).

Combining recorded tracks

— Combine function

This function lets you put several tracks or several independently recorded portions together into a single track. The total number of tracks decreases by one, and all subsequent tracks are renumbered.

Example: Combining tracks B and C.

Track number

1

2

3

4

Original tracks

Combine tracks B and C.

1

2

3

Combine

1 While playing the MD you want to edit, press (MENU).

2 Press either side of (DISC/PRST) repeatedly until “Combine” appears.

3

4 Press either side of (SEEK/AMS) repeatedly to select the set of tracks you want to combine.

Selected track Nos.

5 Press (ENTER) to combine the tracks.

“Complete!” appears, and the selected tracks are combined.

6 To continue combining tracks, repeat steps 4 and 5.

7 Press (MENU) twice.

To cancel the combining procedure, press (MENU) twice anywhere before step 5.

Notes

•The name applied to the first of the original tracks will be labeled on the combined track.

•“Impossible” appears if the unit cannot combine the tracks because the MD has been edited too many times. This is due to the system limitation of MDs and is not a malfunction of the unit.

25