Storing TV channels automatically
The unit selects the TV channels with the strongest signals and assigns them to number buttons in order of their frequency.
Caution
If tuning in a station while driving, use Best Tuning Memory to prevent accidents.
1 Select “TV” (see “Watching the TV” on page 36).
2 Press (MENU), then press either side of (DISC/PRST) repeatedly until “Auto Mem” appears.
3 Press (ENTER).
The unit assigns TV channels to the number buttons in order of their frequency.
A beep sounds when the setting is stored.
Notes
•The unit does not assign TV channels with weak signals. If only a few TV channels with strong signals can be received, some number buttons will remain empty.
•When a preset number is indicated on the display, the unit starts assigning TV channels to buttons from the one currently displayed.
You can assign up to 12 channels (6 each for TV1 and TV2) to the number buttons in the order of your choice.
1 Select “TV” (see “Watching the TV” on page 36).
2 Press either side of (SEEK/AMS) to tune in the TV channel you want to assign to each number button.
3 Press and hold the desired number button ((1) to (6)) until you hear a small beep.
The number button indication and “Memory” appear on the display.
Note
If you try to assign another channel to the same number button, the previously assigned channel will be erased.
37