Using the rotary commander
The rotary commander works by pressing buttons and/or rotating controls.
You can also control optional CD/MD units with the rotary commander.
By pressing buttons
(the SOURCE and MODE buttons)
(SOURCE)
(MODE)
Each time you press (SOURCE), the source changes as follows:
Radio t CD* t MD t TV* t Radio
*If the corresponding optional equipment is not connected, these items will not appear.
Pressing (MODE) changes the operation in the following ways:
•Radio: FM1 t FM2 t FM3 t AM1 t AM2 t FM1
•CD unit*: CD1 t CD2 t … t CD1
•MD unit*: MD1 t MD2 t … t MD1
•TV/Video*: TV1 t TV2 t AUX t TV1
*If the corresponding optional equipment is not connected, these items will not appear.
By rotating the control (the SEEK/AMS control)
Rotate the control momentarily and release it to:
•Locate a specific track on a disc. Rotate and hold the control until you locate the specific point in a track, then release it to start playback.
•Tune in stations automatically. Rotate and hold the control to find a specific station.
By pushing in and rotating the control (the PRESET/DISC control)
Push in and rotate the control to: •Receive the stations stored on the number
buttons. •Change the disc*.
*When an optional CD/MD unit is connected.
33