Customizing Your Notebook Computer
65
Changing Devices in the Drive Bay Using the Drive Bay Tab
To exchange devices while the power is on, you should be aware of the following:
❑Do not attempt to change devices in the drive bay while the power is on unless you use the sequence of steps on the Drive Bay tab.
❑Do not switch to System Hibernation mode or System Suspend mode while changing a device.
❑Do not change a device in the drive bay while your computer is accessing a
❑When installing a hard disk drive to the drive bay for the first time, it may take several minutes before you are able to use your computer.
❑For optimum performance, you should turn off your computer when you insert a hard disk drive. If you insert a hard drive without turning off the power, you must reboot in order for the drive to run at optimum speed.
❑When changing a device in the drive bay of the docking station, you must turn off the computer.