Advanced HotSync® operations

5 Place your CLIÉ handheld on the cradle and press the HotSync button on the front panel of the cradle.

The HotSync operation starts. This HotSync operation records the network information about your computer onto your CLIÉ handheld.

6 Check if your computer‘s network information (Primary PC name and Primary PC address) is entered in your CLIÉ handheld:

1Rotate the Jog Dial navigator to select HotSync and press the Jog

Dial navigator. Or tap the HotSync icon on the Application Launcher screen.

The HotSync screen appears.

2Tap the Menu icon.

3Tap Primary PC Setup from the Options menu. The Primary PC Setup screen is displayed.

4On your computer, click the HotSync icon in the Windows task tray and select Setup from the shortcut menu.

5Click the Network tab, then click TCP/IP Settings to open the TCP/ IP Settings screen.

6Confirm that the Primary PC name and Primary PC address on both screens displayed in sub-steps 3 and 5 match. If they do not match, change the Primary PC name and Primary PC address entered in your CLIÉ handheld, then tap OK.

7On your computer, tap OK to close the TCP/IP Settings screen and the Setup screen.

Preparing your CLIÉ handheld and performing a network HotSync operation

When dialing into a network (Network Modem Sync)

1

2

Rotate the Jog Dial navigator to select HotSync and press the

Jog Dial navigator. Or tap the HotSync icon on the Application Launcher screen.

The HotSync screen appears.

Tap the Menu icon.

Continued on next page

Chapter3 Exchanging and updating data using a HotSync® operation

120