Tap OK.

Changing the Network preferences

4 Tap the arrow V next to End and select one of the following commands. If the command requires additional information, a field appears to the right of it for you to enter the information.

•Wait For: Tells your CLIÉ handheld to wait for specific characters from the TCP/IP server before executing the next command.

•Wait For Prompt: Detects a challenge-response prompt coming from the server and displays the dynamically generated challenge value. You then enter the challenge value into your token card, which in turn generates a response value for you to enter on your CLIÉ handheld. This command takes two arguments, separated by a vertical bar () on the input line.

•Send: Transmits specific characters to the TCP/IP server to which you are connecting.

•Send CR: Transmits a carriage return or LF character to the TCP/IP server to which you are connecting.

•Send User ID: Transmits the User ID information entered in the User ID field of the Network Preferences screen.

•Send Password: Transmits the password entered in the Password field of the Network Preferences screen. If you did not enter a password, this command prompts you to enter one. The Password command is usually followed by a Send CR command.

•Delay: Tells your CLIÉ handheld to wait a specific number of seconds before executing the next command in the login script.

•Get IP: Reads an IP address and uses it as the IP address for your CLIÉ handheld. This command is used with SLIP connections.

•Prompt: Opens a dialog box and prompts you to enter text of some kind (for example, a password or a security code).

•End: Identifies the last line in the log in script.

5 Repeat step 4 until the log in script is complete. 6 Tap OK.

7

Chapter5 Customizing your Sony CLIÉ Handheld (Preferences)

180