Advanced HotSync® operations
Tip
For best results, your computer and your CLIÉ handheld should be 4 to 8 inches (approximately 10 to 20 centimeters) apart, and the path between your CLIÉ handheld and the computer must be clear of obstacles.
5 Tap the 
icon.
The HotSync operation starts. Wait for the message showing that the HotSync operation is complete.
To restore the local HotSync settings
1Connect the cradle to your computer.
2Click the HotSync 
icon in the Windows task tray and clear the check mark of Local Serial from the shortcut menu.
3Click the HotSync 
icon in the Windows task tray again and select Setup from the shortcut menu.
The setup dialog box is displayed.
4Click the Local tab to display the setting for a local HotSync operation as needed.
5Click OK.
Your computer is now ready to perform a local HotSync operation.
Chapter3 Exchanging and updating data using a HotSync® operation | 112 |