Writing Graffiti letters
1 Tap where you want your text to go.
Note
You need to tap above the Graffiti writing area, and you must see a flashing cursor before you write the text.
2 Use the tables on the following pages to find the stroke shape for the letter you want to create. For example, the stroke shown below creates the letter "n".
Note
There are two different stroke shapes available for some letters. For these letters, choose the one that's easiest for you.
Lift stylus here
Start stroke at heavy dot
As you will see later, you use the same shape to create both the upper case and lower case version of a letter.
3 Position the stylus in the
4
5
Position the stylus
Start your stroke at the heavy dot and draw the stroke shape as it appears in the tables.
Lift the stylus from the screen at the end of the stroke shape.
That is all there is to it. When you lift the stylus from the screen, your CLIÉ handheld recognizes your stroke immediately and prints the letter at the insertion point on the screen.
As soon as you lift the stylus from the screen, you can begin the stroke for the next character you want to write.
Continued on next page
Chapter1 Basic operations of your Sony CLIÉ Handheld | 12 |