Print

Operation Search

Before use

Getting started

Recording

Playback

Playing images on a TV

Saving images with an external device

Customizing your camcorder

Troubleshooting

Maintenance and precautions

Contents list

Top page > Getting started > Charging the battery pack > Charging the battery pack using the AC Adaptor (Models with an AC Adaptor)

Charging the battery pack using the AC Adaptor (Models with an AC Adaptor)

1.Turn off your camcorder by closing the LCD screen, and attach the battery pack ( ).

Align the indentation on the camcorder and projection on the battery pack, then slide the battery pack upwards.

2.Connect the AC Adaptor () and the power cord (mains lead) () to your camcorder and the wall outlet (wall socket) ().

A: Align the mark on the DC plug () with that of DC IN jack (). The POWER/CHG (charge) ( ) lamp turns orange.

The POWER/CHG (charge) lamp turns off when the battery pack is fully charged. Disconnect the AC Adaptor from the DC IN jack of your camcorder.

Notes

You cannot attach any “InfoLITHIUM” battery pack other than the V series to your camcorder. You cannot use the NP-FV30 “InfoLITHIUM” battery pack with the camcorder (models with NP- FV50).

In the default setting, the power turns off automatically if you leave your camcorder without any

37

Page 37
Image 37
Sony PJ390E, PJ230E, PJ380E, PJ320E manual Search