9Press the V/v buttons to select “3 FADE EFFECT”, then
press the OK button.
“FADE EFFECT” appears as the screen title, and the current setting is shown inside the [ ].
Tip
If a number is displayed before the menu, you can select the menu by pressing the number button.
10Press the B/b buttons or the left or right Label select
button.
Each time the setting changes, a beep sounds and [ ] moves to the new setting.
ON: fade in/out the button illumination
OFF: normal button illumination
11 Press the (light) button, the centre Label select button, the OK button, or the RETURN button.
“UNIT SETTINGS” appears as the screen title.
12Press the V/v buttons to select “4 LIGHT ON MODE”, then press the OK button or the
centre Label select button.
“LIGHT ON MODE” appears as the screen title, and the current setting is shown inside the [ ].
14 Press the (light) button or the RETURN button three times.
The set mode closes, and the Remote Commander returns to standby for operating the A/V components.
Tip
If a number is displayed before the menu, you can select the menu by pressing the number button.
13Press the B/b buttons or the left or right Label select
button.
Each time the setting changes, a beep sounds and [ ] moves to the new setting.
ALL: The button illumination is activated by pressing any button on the Remote Commander except the
2+/– and PROGRAM +/– buttons. LIGHT: The button illumination is
activated by pressing the | (light) |
button only. |
|