Copying the settings of a COMPONENT select button to another button
You can copy the entire settings of a COMPONENT select button or Label select button to another COMPONENT select button or Label select button.
Notes
•You cannot copy the settings to a COMPONENT select button or Label select button on which any “learned” function (page 12) or Component Macro (page 18) has been programmed or A/V component’s name or label has been changed. (A beep sounds five times and “NG” appears on the screen.)
•Characters displayed when using the button will be also replaced.
Example: To copy the settings on the TV button to the MD button1While pressing the
(light) button, press the OTHER button.
“SET MODE” appears as the screen title.
3Press the V/v buttons to select “2 COPY”, then press the OK button or centre Label select
button.
“COPY” appears as the screen title.
Tip
If a number is displayed before the menu, you can select the menu by pressing the number button.
4Press the TV button.
“TV” appears in the second line of the screen.
5Press the OTHER button repeatedly, then press the centre Label select button
(MD).
A beep sounds and “TV >> MD” appears in the second line of the screen.
2Press the V/v buttons to select “6 UTILITY”, then press the OK button or the
centre Label select button.
“UTILITY” appears as the screen title.
Tip
If a number is displayed before the menu, you can select the menu by pressing the number button.
6Press the
(light) button or the RETURN button three times.
The set mode closes, and the Remote Commander returns to standby for operating the A/V components.
To reset the settingsFollow the procedure in “Resetting a COMPONENT select button or Label select button” on page 28.