4Press the PROGRAM + or PROGRAM – button, then press the 1 (power) button repeatedly until the A/V

component reacts as follows:

TV: Powers off.

Amplifier: Powers off or the volume turns up.

CD player, MD deck, Casssette deck: Powers off or starts playing. Other component: Powers on

5Press the OK button or centre

Label select button.

A beep sounds, and the four-digit preset code you have set and “OK” appear on the screen, then the display returns to the screen shown in step 2.

6To set other A/V components, repeat steps 3-5.

7 Press the (light) button or the RETURN button twice.

The set mode closes, and the Remote Commander returns to standby for operating the A/V components.

Operating your A/V components with the Remote Commander

Select the desired A/V component by pressing the COMPONENT select button on the Remote Commander, then operate the A/V component.

Selecting the desired A/V

component

Press the COMPONENT select button to select the desired A/V component.

If you press the OTHER button, selectable A/V components appear on the screen. Select the desired A/V component by pressing the corresponding Label select button. The A/V components displayed on the screen change by pressing the OTHER button repeatedly.

Continued 9GB