Basic Operations

Setting operations of A/V components

—Setting component code

The Remote Commander is preset at the factory to operate Sony brand A/V components. (Refer to the table below.)

If you are using the Remote Commander with factory-set Sony components, skip the following procedures.

To use with other brand A/V components, or Sony A/V components which do not function with the Remote Commander, you need to follow the procedures to set the component code.

Factory preset

COMPONENT select buttons

Screen title

Preset A/V components

 

 

 

 

 

 

TV

 

 

TV

Sony TV (Analogue)

 

 

 

 

 

 

VCR

 

 

VCR

Sony VCR (Video Cassette Recorder)

 

 

 

 

 

 

SAT

 

 

SAT

Sony Analogue Satellite Receiver

 

 

 

 

 

 

DVD

 

 

DVD

Sony DVD player

 

 

 

 

 

 

 

 

1/2

Label select button-left

CABLE

Analogue Cable box

 

 

 

 

 

 

 

Label select button-centre

DVD-R

Sony DVD Recorder

 

 

2/2Page

OTHER

 

 

 

 

 

Label select button-right

AMP

Sony Receiver/Amplifier

 

 

 

 

 

 

 

 

 

 

 

 

Label select button-left

CD

Sony CD player

 

 

 

 

 

 

 

 

Page

Label select button-centre

MD

Sony MD deck

 

 

 

 

 

 

 

Label select button-right

TAPE

Sony Cassette deck

 

 

 

 

 

 

 

 

 

1Refer to the tables in the supplied “Preset Code List” to find the four-digit preset code for the desired A/V

component.

If more than one code number is listed, use the number that is listed first. For example, to set up a Panasonic TV, you would use the code number 8095.

3Press the V/v buttons to select “1 PRESET”, then press the OK button or the centre

Label select button.

“PRESET” appears as the screen title.

Tip

If a number is displayed before the menu, you can select the menu by pressing the number button.

4Press the COMPONENT select button for the desired

A/V component.

The selected A/V component’s label and the preset code currently set appear on the screen.

2 While pressing the (light) button, press the OTHER button.

“SET MODE” appears as the screen title.

Tips

•To set A/V components which are not specified on the COMPONENT select buttons, press the OTHER button repeatedly, then press the Label select button corresponding to the desired A/V component.

•You can set components to the COMPONENT select buttons or Label select buttons than those that are specified on each other button or on the screen. Note however, that the TV button can only be set a TV, and the Label select button (to which an amplifier is set at the factory preset) can only be set an amplifier or DVD player home theatre system.

Continued 7GB