5Press the number buttons or V/v buttons to input digits or
characters.
Begin inputting digits or characters from the position where the cursor (x) is displayed. Press the B/b buttons or the left or right Label select button to move the cursor (x).
6Press the OK button or centre
Label select button.
A beep sounds and the function name is changed.
7Press the
(light) button.
The display returns to the screen shown in step 2.
8Press the
(light) button or the RETURN button twice.
The set mode closes, and the Remote Commander returns to standby for operating the A/V components.
Changing the function
labels
Up to 10 characters or digits can be input.
1While pressing the
(light) button, press the OTHER button.
“SET MODE” appears as the screen title.
2Press the V/v buttons to select “3 LABEL”, then press the OK button or the centre
Label select button.
“LABEL” appears as the screen title.
Tip
If a number is displayed before the menu, you can select the menu by pressing the number button.
3Press the COMPONENT select button or Label select button on which the A/V component with the function label you want to change is
set.
The selected A/V component appears in the second line on the screen.
4Press and hold the button of which you want to change the function label for over 2
seconds.
The selected function label and cursor (x) appear on the screen and the Remote Commander is on standby for input.
5Press the number buttons or the V/v buttons to input
digits or characters.
Begin inputting digits or characters from the position where the cursor (x) is displayed. Press the B/b buttons or the left or the right Label select button to move the cursor (x).
6Press the OK button or the
centre Label select button.
A beep sounds and the function label is changed.
7Press the
(light) button.
The display returns to the screen shown in step 2.
8Press the
(light) button or the RETURN button twice.
The set mode closes, and the Remote Commander returns to standby for operating the A/V components.