Resetting the settings
Resetting a COMPONENT select button or Label select button
You can reset the A/V component settings to the factory preset.
1 While pressing the (light) button, press the OTHER button.
“SET MODE” appears as the screen title.
2Press the V/v buttons to select “7 RESET”, then press the OK button or the centre
Label select button.
“RESET” appears as the screen title.
5 Press the (light) button or the RETURN button three times.
Setting is complete and the Remote Commander returns to the status before you started setting.
Tip
If a number is displayed before the menu, you can select the menu by pressing the number button.
3Press the V/v buttons to select “1 COMPONENT”, then press the OK button or the
centre Label select button.
“COMPONENT” appears in the second line on the screen.
Tip
If a number is displayed before the menu, you can select the menu by pressing the number button.
4Press the COMPONENT select button or Label select
button you want to reset.
A beep sounds and all the settings on the selected component are reset to the factory settings.