Setting the beep
The Remote Commander is preset at the factory with the confirmation beep set to on. You can change the setting to turn off the beep.
1 While pressing the (light) button, press the OTHER button.
“SET MODE” appears as the screen title.
2Press the V/v buttons to select “5 UNIT SETTINGS”, then press the OK button or
the centre Label select button.
“UNIT SETTINGS” appears as the screen title.
Tip
If a number is displayed before the menu, you can select the menu by pressing the number button.
3Press the V/v buttons to select “7 BEEP SOUND”, then press the OK button or the centre
Label select button.
“BEEP SOUND” appears as the screen title, and the current setting is shown inside the [ ].
4Press the B/b buttons or the left or right Label select
button.
Each time the setting changes, a beep sounds and [ ] moves to the new setting.
ON: Turns on the beep.
OFF: Turns off the beep.
5 Press the (light) button or the RETURN button three times.
The set mode closes, and the Remote Commander returns to standby for operating the A/V components.
Note
When making settings, a beep sounds even if the button beep is set to off.
Tip
If a number is displayed before the menu, you can select the menu by pressing the number button.