Other Useful

Functions

Operating the Remote
Commander in the dark

(light) button

COMPONENT

Press the(light) button to turn on the button illumination of the Remote Commander. Press the(light) button again to turn off.

If no button is pressed for over 10 seconds, the button illumination of the Remote Commander automatically turns off.

Default button illumination settings

Off-time setting

10 seconds

Brightness Level

15 (maximum)*

 

 

Fade effect

On

 

 

On-mode setting

All buttons

 

 

Checking the button
function
—Labelling function

When you press a button, its function appears in the second line on the screen while transmitting the remote control signals.

You can also display the function without transmitting the remote control signals. To change the characters displayed on the screen, see “Changing the characters on the screen” (page 15).

1While pressing the(light) button, press the desired

button.

The button function appears on the second line of the screen. The remote control signals are not transmitted.

Button function

*The Brightness level is preset to 15 (maximum) at the factory. If you use the Remote Commander with this setting, battery life may be shorter.

See “Setting the button illumination” (page 24) to change the button illumination settings.

Locking the controls
—Hold function

To prevent accidental operation, you can lock all the buttons with the Hold function.

1While pressing the(light) button, press the SCROLL button.

The following message appears on the screen and all the buttons are locked.

To unlock the controls

While pressing the

(light) button, press the

SCROLL button.

 

11GB