Getting Started

Unpacking

Check the contents of the package before using the Remote Commander.

• Remote Commander RM-VL1400T (1)

•Operating Instructions (1)

•Preset Code List (1)

•Warranty Card (1)

Installing the batteries

Slide and open the battery compartment lid and insert two LR6 (size AA) alkaline batteries (not supplied). Be sure to match the + and – indications of the batteries with the + and – indications of the battery compartment.

When to replace the batteries

Under normal conditions, the alkaline batteries will last up to 5 months. If the Remote Commander does not operate properly, the batteries are getting weak and “E” appears on the screen.

Notes on replacing the batteries

•Do not take more than one hour to replace the batteries. Otherwise, your unit settings (page 24) will be initialized.

•Do not attempt to recharge dry batteries.

•Do not carry dry batteries together with coins or other metallic objects. This can generate heat if the positive and negative terminals of the batteries accidentally come into contact with metallic objects.

•When you are not going to use the unit for a long time, remove the batteries to avoid damage from battery leakage and corrosion.

•Do not use different types of batteries at the same time.

•When you replace the batteries, replace them both with new ones.

5GB