Sony SAT-HD300 operating instructions Connecting to Antennas Oval Dish Satellite A, B, C

3-4. Connecting to Antennas - Oval Dish (Satellite A, B, C)

Antenna

Cable TV

wall jack

LNB	LNB	LNB
Sat A	Sat C	Sat B

Dish

5x4 Multi-switch*

Output

ANT IN
	DIGITAL
	AUDIO	S VIDEO
CABLE IN	OUT
		OUT

OUT TO TV

OPTICAL

VIDEO OUT

1 2

L1 L2

R1 R2

AUDIO OUT

COMPONENT OUT (1080i/720p/480p/480i)

	DATA PORT
Y
Pb	RGB OUT
	TYPE
Pr	(1080i/720p/480p)

RF	PHONE	SATELLITE
REMOTE		IN
DVI-HDTV OUT	JACK
VCR
CONTROL
(1080i/720p/480p/480i)

Phone wall jack

Receiving Signals

1.Connect the “Antenna” to the “ANT IN” jack on the DIRECTV® HD Receiver using a coaxial RF cable.

2.Connect the cable TV signal to the “CABLE IN” jack on the DIRECTV HD Receiver using a coaxial RF cable.

3.Connect the “Jack 1” of the multi-switch to the “SATELLITE IN” jack on the DIRECTV HD Receiver using a coaxial RF cable. (For proper dish installation, refer to the “Installer’s Guide” provided with your satellite dish antenna.)

4.Connect the “Phone Wall Jack” to “PHONE JACK” on the DIRECTV HD Receiver using a phone cable.

NOTE

While you are subscribing to a DIRECTV® program- ming package, you can still view over-the-air and cable TV programs, if you make connections to the over-the-air and/or cable jacks.

NOTE

A triple LNB multi-satellite dish with a SAT C LNB is required to receive all DIRECTV® High-Definition programming, along with this DIRECTV HD Receiver.

* Sat C may also be connected via a SAT B/SAT C combiner with a 4x4 multi-switch (not supplied by Sony). 26