Setup 5:Connect the power cord

1Connect the supplied power cord securely to the display’s AC IN connector.

2Connect the other end securely to a power outlet.

Setup 7:Turn on the display and computer

1Make sure that the 1 (power) Indicator blinks red. At the time of your purchase, the MAIN POWER switch is set to the \ side.

1 to AC IN

2to a power outlet power cord (supplied)

MAIN POWER

Note

lights in red

Setup 6:Secure the cords and close the connector cover

1Draw the cords and cables through the cable holder as illustrated.

2Close the connector cover.

Note

When bounding the cords and cables, be sure to loosen them a little. If they get pulled hard they may come off from the connectors/plugs as you adjust the screen angle. If you stretch the cords and cables too hard they may get damaged.

When the MAIN POWER switch on the right side of your display is not set to the \ side, press the \ side and check that the 1 (power) indicator blinks red.

2Press the 1 (power) switch located on the front right of the display.

The 1 (power) indicator lights up in green.

lights in green

3Turn on the computer.

10