Sony SDM-X75, SDM-X95 MENU POSITION menu, INPUT SENSING menu, SCREEN menu (analog RGB signal only), function, xAutomatic picture quality adjustment

Items

0MODE RESET

Options	Features
OK	You can reset BACKLIGHT,
	CONTRAST, BRIGHTNESS,
	GAMMA, COLOR, and SHARPNESS
	to the default setting.

CANCEL	To cancel resetting and return to the
	menu.

SCREEN menu (analog RGB signal only)xAutomatic picture quality adjustmentfunction

When the display receives an input signal, it automatically adjusts the picture’s position and sharpness (phase/pitch). This ensures that a clear picture appears on the screen (page 16).

Note

While the automatic picture quality adjustment function is activated, only the 1 (power) switch is operable.

If the automatic picture quality adjustment function of this display did not seem to adjust the picture completely

You can make further automatic adjustment of the picture quality for the current input signal. (See AUTO below.)

If you still need to make subtle adjustments to your picture quality

You can manually adjust the picture’s sharpness (phase/pitch) and position (horizontal/vertical position).

These adjustments are stored in memory and automatically recalled when the display receives the same input signal. These settings may have to be repeated if you change the input signal after reconnecting your computer.

Items	Features
AUTO	Make the appropriate adjustments of the
	screen’s phase, pitch and horizontal/
	vertical position for the current input
	signal and save them.

xAdjust the picture’s sharpness and position manually (PHASE/PITCH/H CENTER/V CENTER)

You can adjust the picture’s sharpness and position as follows.

1Set the resolution to 1280 × 1024, on the computer.

2Load the CD-ROM.

3Start the CD-ROM and display the test pattern.

For Windows User When Auto run operates:

1 Click “DISPLAY ADJUSTMENT TOOL (UTILITY).”

2Click “Adjust” and confirm the resolution and then click “Next”.

Test pattern for PITCH, PHASE, H CENTER and V

CENTER appears in order.

When Auto run fails to operate:

1Open “My Computer” and right click the CD-ROM icon. Go to “Explorer” and open the CD-ROM icon.

2Open [Utility] and then select [Windows].

3 Start [Win_Utility.exe]. Test pattern appears.

For Macintosh user

1Open [Utility] and then select [Mac].

2 Start [Mac_Utility.exe] Test pattern appears.

	Items	Press the m/M buttons
	PHASE	Minimize the horizontal stripes on the
		screen.

	PITCH	Vertical stripes become vanished.

	H CENTER	Adjust the picture position when your
		picture does not appear on the center of
	V CENTER	picture does not appear on the center of
	V CENTER	the screen.
		the screen.

MENU POSITION menu

Items	Press the m/M buttons
MENU POSITION	You can change the menu displayed
	position on the screen. You can choose
	one of 9 positions.

INPUT SENSING menu

Those models of digital input search any input signals. You can switch the signals back and forth automatically.

	Items	Features
	AUTO ON	When the selected input has no signal, or
		when you select an input with the OK
		button and if it has no input signal, an
		on-screen message appears (page 18).
		Then the display checks the input signal
		and switch to other input automatically.
		When an input is changed, the selected
		input is displayed on the upper left
		corner of the screen.
		When there still is no input signal, the
		display goes into the power saving mode.

	INPUT 1	When turning on the display, INPUT1 or
		INPUT2 will be displayed as priority
		setting (INPUT SENSING will not
	INPUT 2	setting (INPUT SENSING will not
	INPUT 2	function).
		function).

	AUTO OFF	The input is not changed automatically.
		Press the OK button to change the input.