To use the display comfortably

Adjust the viewing angle of your display according to the height of your desk and chair so that light is not reflected from the display to your eyes.

Notes

When you adjust the display position, do not crash the display or cables or other USB devices against objects around it. Be sure to move the display quietly.

Do not put any objects under the display when you adjust the height of stand. It may get damaged by accident.

When connecting USB products or USB devices to the display, be sure not to crash them against the Stand Base. As adjusting the tilt and height of the display, the display might get damaged depending on the size of the products or devices. (USB port-equipped models only)

Selecting the input signal (INPUT1/ INPUT2)

Press the OK button.

The input signal changes every time you press the OK button.

INPUT

OK

On-screen message

Input signal configuration

(Appears about 5 seconds on

 

the upper left corner.)

 

 

 

INPUT1 : DVI-D

DVI-D input connector

 

(digital RGB) for INPUT1

 

 

INPUT2 : HD15

HD15 input connector

 

(analog RGB) for INPUT2

 

 

12