The Gigaset SE366 WLAN

Registering a PC

 

 

 

 

Access Point

 

Registering

WLAN network adapter

 

 

 

 

 

 

 

 

 

 

 

 

 

SSID and pre-shared key

 

Pushing the registration

Activating WPS regis-

button

 

 

 

tration via software

 

 

 

 

 

This procedure corresponds to the registration mode Push Button (default) on your Gigaset SE366 WLAN.

Please note that a new SSID and pre-shared key will be generated when the registration button is pushed for the first time after each factory reset of the Gigaset SE366 WLAN. This means that the clients have to be registered again.

uVia Personal Identification Number (PIN)

The PIN offers higher security for registration. No other device (e.g. of the neigh- bour) can log in unnoticed. A PIN is generated on one WLAN device, usually the access point, which has to be entered on the other devices for registration. If a client logs in with this PIN, the security data is synchronised.

It is also possible to create the PIN on one of the clients.

Access Point

 

 

 

Repeater or

 

Registering

WLAN network adapter

 

 

 

 

 

 

 

 

 

 

SSID and pre-shared key

 

Generating the PIN via configuration user interface

Entering and activating the PIN via configuration user interface

If the PIN of the device that you are just configuring is to be used in your network, choose the registration mode Send own PIN.

However, if the device is to use the PIN of another device, choose the registration mode Enter partner device PIN.

WLAN adapters without WPS can also be set up manually, i.e. SSID and key must be entered manually. WPA-PSK encryption must be used.

14