Sony SE366 The user interface

The user interface

Once you have configured the network settings on a PC in your local network, you can then use that PC to configure the Gigaset SE366 WLAN with the aid of the Gigaset SE366 WLAN's user interface. You can use any browser for the configuration; the recommended products are Microsoft Internet Explorer 6.0 or higher and Mozilla Firefox 1.0 or higher.

Note:

To start the configuration environment, you might need to deactivate the HTTP proxy for your browser (see page 93).

If you use Mozilla Firefox or if you use Internet Explorer and Windows XP Service Pack 2, you need to configure the popup blocker (see page 93).

Launching the user interface

To access the Gigaset SE366 WLAN's user interface:

ìLaunch your Web browser.

ìEnter the IP address of the Gigaset SE366 WLAN in the browser's address field. http://192.168.2.1

When the configuration program is opened for the first time or if the device has been switched back to the factory settings, the default settings assistant is started (see page 31).

Otherwise the registration page for entering the password will appear.

ìEnter the password and click OK.

The default password on delivery is admin.

Note:

For security reasons you should change the password at a later stage (see page 35).

A page containing security information is displayed.

ìClick OK.

You will now see the start screen.