Security settings
Note:
uIt is very important that you make a note of the key or passphrase. You will need this information to configure the wireless network adapters correctly.
uWhen you have concluded the Security Setup Wizard you must also change the WEP encryption data of the wireless network adapters in the connected PCs since, without the change, they will not be able to access the Gigaset SE366 WLAN's wireless network.
ìTo go to the next step in the Security Setup Wizard, click Next >.
Access control within the wireless network
In this step you can specify which PCs will have wireless access to the Gigaset SE366 WLAN and hence to your LAN. Access control is based on the MAC addresss of the PCs' network adapters. You can enter the MAC addresses for the PCs manually or select them from the list of PCs that are currently logged in.
The default setting for access control is disabled. This means that all PCs that use the correct SSID and the right encryption method can log in.
ìNext to MAC address filter select the option On to activate MAC filtering.
Entering MAC addresses manually
ìEnter the MAC address of the network adapter. You will normally find this address on a label on the device.
ìEnter a name for the PC.
ìClick Add to add the entry to the list.
42